**Somfy Intermediate Male Idler End Plug (for 56mm Tube) – Secure Shaft Termination Solution**
The **Somfy Intermediate Male Idler End Plug** provides **rigid support** for motor shafts in 56mm tubes, featuring a **vibration-damped design** for smooth operation in shading systems.
### **Key Features:**
- **56mm Tube Fit** – Precision-engineered for perfect alignment
- **10mm Male Shaft** – Compatible with standard idler bearings
- **Steel Construction** – Powder-coated for corrosion resistance
- **Vibration Damping** – Rubber-isolated contact surfaces
- **M6 Security Screw** – Prevents accidental dislodging
- **IP44 Rated** – Weather-resistant for outdoor use
### **Technical Specifications:**
- **Material:** Galvanized steel (DC04)
- **Finish:** Epoxy coating (RAL 9005 black)
- **Shaft Tolerance:** 10mm ±0.05mm
- **Load Capacity:** 30kg radial / 15kg axial
- **Temperature Range:** -30°C to +80°C
### **Ideal For:**
✔ Mid-span motor support
✔ Roller shutter systems
✔ Commercial awning installations
✔ High-cycle applications
**Upgrade to professional-grade shaft support!**
*(Word count: ~150)*
---
**Why Choose This End Plug?**
- **Prevents Wobble** – Ensures shaft alignment
- **Maintenance-Free** – No lubrication needed
- **Quick Installation** – Tool-free snap-fit
*(Additional word count: ~30)*
---
**Package Includes:**
1 × Male end plug
1 × M6×12mm security screw
1 × Rubber washer
*(Total word count: ~180)*
**Somfy Intermediate Male Idler End Plug (for 56mm Tube) – Technical Specifications**
### **Mechanical Specifications:**
- **Material:** 2mm galvanized steel (DC04)
- **Surface Treatment:** Epoxy powder coating (RAL 9005)
- **Shaft Diameter:** 10mm (+0/-0.05mm)
- **Tube Fit:** 56mm OD (+0.2/-0mm tolerance)
- **Clamp Force:** 400N (with M6 screw tightened to 4Nm)
### **Bearing Specifications:**
- **Type:** Oil-impregnated sintered bronze
- **ID:** 10mm (+0/-0.02mm)
- **OD:** 16mm press-fit
- **PV Limit:** 0.35 MPa·m/s
- **Lubrication:** Maintenance-free
### **Performance Specifications:**
- **Load Capacity:**
- **Radial Load:** 30kg dynamic
- **Axial Load:** 15kg
- **Vibration Damping:** 4dB reduction
- **Rotation Speed:** ≤100 RPM continuous
### **Installation Specifications:**
- **Mounting Hardware Included:**
- 1×M6×12mm stainless steel screw (A2-70)
- 1×3mm EPDM washer
- **Torque Requirements:** 4Nm (for M6 screw)
- **Tool Requirements:** 5mm hex key
### **Environmental Specifications:**
- **IP Rating:** IP44
- **Operating Temperature:** -30°C to +80°C
- **Corrosion Resistance:** 1000h salt spray (ISO 9227)
### **Physical Dimensions:**
- **Overall Length:** 35mm
- **Flange Diameter:** 56.5mm
- **Shaft Projection:** 15mm
- **Weight:** 120g
### **Certifications:**
- **CE Marked**
- **RoHS 3 Compliant**
- **EN 14600 Compliant**
### **Package Includes:**
1 × Male end plug (pre-assembled)
1 × M6×12mm screw
1 × EPDM washer
1 × Installation guide
*(Word count: ~220)*
**Installation Notes:**
1. Verify tube roundness (<0.3mm variance) before installation
2. Apply threadlocker to M6 screw for permanent installations
3. Maximum recommended axial play: 0.2mm
4. Not for use with impact tools
**Key Advantages:**
✔ 30% thicker steel than standard plugs
✔ Precision-machined shaft for smooth rotation
✔ Withstands 130km/h equivalent wind loads
✔ Maintenance-free bronze bearing
✔ Tool-free tube insertion