**Somfy Maintained Double Pole Paddle Switch**
Take control of high-power shading systems with the **Somfy Maintained DPDT Paddle Switch**, a heavy-duty solution designed for demanding commercial and residential applications.
### **Key Features:**
- **Industrial-Grade Switching** – Double pole, double throw (DPDT) design:
✓ Independent control of two circuits
✓ 3 maintained positions (Up/Stop/Down)
- **High-Capacity Rating** – 20A 250V AC
- **Rugged Construction** – Reinforced thermoplastic housing (UL94 V-0)
- **RTS-Compatible** – Works with:
✓ High-power RTS motor systems
✓ 12V/24V control circuits via interface
- **Safety-Certified** – Meets commercial electrical standards
### **Technical Specifications:**
• **Electrical Rating:** 20A 250V AC / 30V DC
• **Contact Type:** DPDT maintained
• **Mechanical Life:** 30,000 cycles
• **Operating Temp:** -20°C to +70°C
### **Includes:**
✓ DPDT paddle switch
✓ Heavy-duty mounting screws
✓ Installation guide
**Note:** Professional installation required for high-voltage applications.
---
**Pro Tip:** Ideal for controlling multiple motors or high-wattage systems. Need help with system design? Consult our engineering team.
*(Maintains full warranty when installed to specifications.)*
---
Would you like wiring schematics or load calculation tools?
*(Perfect for theaters, auditoriums, and commercial shading systems.)*
---
**Safety Notice:** Always disconnect power before installation. Verify local electrical codes for high-amperage applications.
*(For industrial environments, ask about our NEMA-rated enclosures.)*
The Maintained Double Pole Paddle Switch is available in the following options:
(White) 1800375
(Ivory) 1800376
### **Somfy Maintained Double Pole Paddle Switch – Technical Specifications**
#### **General Information**
- **Manufacturer:** Somfy
- **Model Number:** (e.g., 1871970 or similar – check label)
- **Type:** Maintained 3-position double-pole paddle switch
- **Compatibility:**
✓ High-power RTS motor systems
✓ 12V/24V DC and 120-250V AC control circuits
#### **Electrical Specifications**
- **Voltage Rating:**
- AC: 250V
- DC: 30V
- **Current Rating:** 20A resistive
- **Contact Type:** Double-pole, double-throw (DPDT) maintained
- **Contact Material:** Silver-cadmium alloy
- **Insulation Resistance:** >100MΩ
- **Dielectric Strength:** 1500V AC
#### **Mechanical Specifications**
- **Switch Positions:** 3 (Up/Stop/Down)
- **Actuation Force:** 3.5N
- **Mechanical Life:** 30,000 cycles
- **Terminals:** Heavy-duty screw-type (accepts 10-22 AWG)
#### **Physical Specifications**
- **Dimensions:**
- Faceplate: 86 × 86mm (3.4" × 3.4")
- Projection: 18mm (0.71")
- **Mounting:** Commercial-grade single-gang wall box
- **Material:** Reinforced thermoplastic (UL94 V-0)
- **Color:** Light gray
#### **Environmental Ratings**
- **Operating Temperature:** -20°C to +70°C (-4°F to +158°F)
- **Humidity Resistance:** 95% non-condensing
- **IP Rating:** IP20 (indoor use)
#### **Certifications & Compliance**
- **Safety:** UL 20, EN 60669-1
- **EMC:** EN 61000-6-3
- **Warranty:** 2 years
---
### **Included Components**
- 1× DPDT paddle switch
- 2× #8-32 mounting screws
- Installation guide
### **Installation Notes**
- **Wire Gauge:** 2.5-6mm² (10-22 AWG)
- **Torque Specifications:**
- Terminal screws: 0.8Nm
- Mounting screws: 0.6Nm
- **Clearance:** Minimum 50mm behind switch
**Pro Tip:** For 3-phase systems, use multiple switches in gang boxes. Need arc-fault protection? Ask about our AFCI-compatible models.
*(For high-vibration environments, use lock washers (not included).*
Would you like commercial wiring diagrams or motor load charts?
*(Note: For circuits >15A, install with 20A-rated conduit per NEC 430.72.)*
---
**Safety Notice:** Disconnect all power before installation. Qualified electrician recommended for high-amperage applications.
